Walkera DEVO10 + RX1002

Walkera DEVO10 + Flybarless 10 CH RX1002 Walkera Transmitter

New Generation DEVO10 Transmitter Representing a New Generation of Transmitters:

•     The DEVO-10 adopts 2.4 GHz Direct Sequence Spread Spectrum (DSSS) technology
•     Automatic ID binding and ID assignment. It can also be customizedly set as fixed ID code
•     USB online update makes you always enjoy the latest programme
•     Adjustability of hi-frequency output power enjoys more personality and friendly environment
•     Wireless data transmission between two DEVO-10 helps experience the training function
•     Up to 30-model data can be saved
•     DEVO-10 adjusting the gyro sensitivity makes hovering flight and fancy flight in an wasy way
•     Shape design accords with human engineering and provides comfortable holding
•     Both the length and tension of the sticks can be adjustable
•     DEVO-10 can be freely switched among Mode 1, 2, 3 and 4
•     DEVO-10 is suitable for helicopter and airplane. In the helicopter mode, there are three flight modes,
•     Switchof which can be freely set and its parameters can be personalizedly adjusted to meet the requirement for F3C or 3D aerobatic flight

Devo10 Introduction video:

http://www.youtube.com/watch?v=7bB0LVuxEig

    RX1002 Receiver Features:

•     Adopts 2.4GHz Direct Sequence Spread Spectrum (DSSS) that features fast reaction and strong anti-jamming function
•     Double reveiving circuits, signal automatic switches, which effectively assure the stability of receiving singal
•     The Single Chip Micyoco as CPU provides super-strong analysing ability
•     When the transmitter powered on, the receiver maintains the frequency and the ID memories when its changing a new battery pack
•     It can be customizedly set as fixed ID and automatic ID assignment

    RX1002 Receiver Specification:

•     Type: 2.4GHz 10 channels
•     Sensitivity: -105dbm
•     Frequency interval: = 4M
•     Weight: 9.5g
•     Dimension: 38*28.5*14.5mm
•     Receiver battery: 4.8-6V 13000 mAh

TELEMETRY Functions:

• Protect your RC helicopter/airplane investment and put an end to constant worrying about running low on battery.airplane investment.
• This transmitter is set up to wirelessly receive updated telemetry voltage data from the aircraft.
• You can set the DEVO 10 to trigger a sustained vibration alarm once the battery has dropped below your pre-defined voltage.
• You will no longer lost track of the battery power or forget to land. Since the battery voltage can be clearly displayed on the transmitter LCD, you no longer need to check a battery with a meter before flight.

Devo10 Telemetry Video:

http://www.youtube.com/watch?v=RTWxrQof6HQ

•     Encoder: 10-channel micro computer system
•     Frequency: 2.4GHz DSSS
•     Output power: = 10mW
•     Current drain: 200mA (100mW)
•     Transmitter power supply: NiMH 12V 1600mAh
•     Output pulse: 1000-2000ms

Write a review